YCB stainless steel gear pump

The use of YCB stainless steel gear pump: suitable for conveying lubricating oil or other liquids with properties similar to lubricating oil, which does not contain solid particles and fibers, is non corrosive, has a temperature not exceeding 200 ℃, and a viscosity of 5 × 10-6~1.5 × 10-3m2/s (5-1500cSt), as well as for hydraulic transmission systems.

Application scope:

Can be used as a transmission and booster pump in oil transportation systems;

Can be used as a fuel pump for delivery, pressurization, and injection in the fuel system;

A hydraulic pump that can be used to provide hydraulic power in hydraulic transmission systems;

In industry, it can be used as a lubricating oil pump.

Structural features:

YCB stainless steel gear pump mainly consists of gears, shaft, pump body, pump cover, bearing sleeve, shaft end seal, etc. The gear is manufactured with a double arc sine curve tooth profile. Its outstanding advantage compared to involute gears is that there is no relative sliding of the tooth profile during the gear meshing process, so the tooth surface has no wear, runs smoothly, has no liquid phenomenon, low noise, and long service life. This pump has freed itself from the constraints of traditional design, ushering in a new era in the design, production, and use of gear pumps. The pump is equipped with a protective valve as overload protection, and the total reflux pressure of the protective valve is 1.5 times the rated discharge pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range. However, please note that this protective valve cannot be used as a pressure reducing valve for long-term operation. If necessary, it can be installed separately on the pipeline.

The pump shaft end seal is designed in two forms, one is a mechanical seal and the other is a packing seal, which can be determined according to specific usage conditions and user requirements.

From the extended end of the spindle towards the pump, it rotates clockwise.

The YCB stainless steel gear pump has standards and criteria in its selection. By selecting it according to good performance and standards, it can meet the requirements and performance of the industry, fully demonstrate its good contribution and performance value, and make important contributions in the transportation of liquids. The selection basis for YCB stainless steel arc pump should be based on the process flow, water supply and drainage requirements, and consider five aspects, including liquid conveying capacity, device head, liquid properties, pipeline layout, and operating conditions.

Performance parameter table: