CB high viscosity pump

CB high viscosity pump is a horizontal displacement rotary pump suitable for conveying various lubricating substances and liquids, such as heavy oil, industrial light oil, heat transfer oil, vegetable oil, paint, dyes, etc. The viscosity does not exceed 260 degrees Celsius and is not suitable for conveying highly corrosive liquids containing hard particles or fibers, as well as medium liquids with high volatility and low flash points. For example: ether gasoline benzene, etc

The characteristic of CB high viscosity pump is that the pump body assembly includes a driving shaft and a driven shaft. The front of the driving shaft and the driven shaft are located inside the pump body, while the rear is located inside the box. The front ends of the driving shaft and the driven shaft are respectively equipped with rotors, and a sealing combination composed of a sealing sleeve, an O-ring, and a retaining ring is installed on the pump body. The driving gear, driven gear, and rolling bearing are respectively installed on the box body, and the driving gear meshes with the driven gearThis type of pump is suitable for conveying lubricating oil or liquids with properties similar to lubricating oil, which does not contain solid particles and fibers, is non corrosive, has a temperature not exceeding 180 ℃, and a viscosity not exceeding 2000cSt. Especially suitable for conveying liquids with high viscosity, such as paint, heavy oil, machinery oil, diesel, etc. Can be used for conveying, boosting, fuel injection, hydraulic conveying, and lubricationCB high viscosity pumps have the characteristics of simple structure, easy maintenance and use, and are widely used in industrial sectors such as machinery, petrochemicals, metallurgy, textiles, pharmaceuticals, food, papermaking, and light industryCB high viscosity pumps are mainly composed of gears, shafts, pump bodies, end caps, and shaft end seals. The gear shaft is made of steel that has been heat treated and assembled with oil-free lubrication bearings and pump end caps. It is superior to similar products in conveying paints, viscous oils, and other liquids, and has the advantages of high suction and long service life. The lubrication of all parts inside the pump is achieved by utilizing the medium conveyed during pump operationCB high viscosity pumps are divided into two types: inner bridge and outer bridge. When in use, the pump head and tile bracket need to be fixed on the same pump base, and then connected to drive equipment such as motors or diesel engines using pulleys. It is easy to disassemble and use, and can adapt to a wide working environment. Elastic connectors can also be directly connected to the motor and fixed on the same base for useBefore installation, it is necessary to check whether the equipment has been damaged during transportation, such as the motor being damp, bumped, or foreign objects entering the pump inlet and outlet, and take corresponding measures. The installation pipeline should be clean inside, and all connecting parts should not leak air, and the weight of the pipeline should be avoided from being borne by the pump. When transporting liquids containing impurities, appropriate filtering devices should be installedBefore the pump starts working, check if all fasteners of the pump are secure. Is the valve of the inlet and outlet pipeline open. From the extended end of the main shaft (pulley) to the pump, it rotates clockwise. When starting the transportation of high-temperature media, point operation should be used, and then connected for operation after one minuteAttention should be paid to the maintenance of the pump during operation. The pressure of the pump should comply with the technical specifications. Pay attention to the shaft seal. If there is a leakage, adjust the pressure cover screw according to its severity and do not tighten it too tightly. The pump adopts a mechanical seal and needs to be replaced with a new seal. If the pump produces abnormal noise, it should be stopped immediately for inspection