Daily maintenance and upkeep of arc pump equipment

Firstly, the daily maintenance and upkeep of circular arc gear pump equipment has been widely applied in the petrochemical management mode in recent years, and has been increasingly accepted by managers due to its good management effect. From the perspective of maintenance and upkeep of chemical circular arc gear pump equipment, it cannot be separated from a single management mode. Moreover, through management, the efficiency of operation of circular arc gear pump equipment is improved, energy conservation and consumption reduction are achieved, which is an important foundation for the stable development of chemical enterprises. Currently, domestic chemical industry has regarded the maintenance and upkeep of chemical circular arc gear pump equipment as an important content to improve enterprise development. Not only is the normal operation of circular arc gear pumps, but also the production cost of enterprises is reduced to a certain extent

In general, the on duty staff is responsible for the daily maintenance and upkeep of the arc gear pump equipment. The daily maintenance and upkeep of the arc gear pump equipment mainly includes inspecting the operation of the arc gear pump equipment, checking whether there are any damage problems in the components of the arc gear pump equipment, and handing over the maintenance and upkeep records of the arc gear pump equipment with the next on duty staff. During the daily maintenance and upkeep of the arc gear pump equipment, the on duty staff should pay attention to whether there is "abnormal noise", whether there is "high temperature", whether the pressure and instrument signals are normal during the operation of the arc gear pump equipment. In addition, they should also understand whether the production pressure is within the normal range that the arc gear pump equipment can withstand, and whether the on duty staff Before leaving work, the situation of the arc gear pump equipment during shift time and any problems encountered with the arc gear pump equipment should be informed one by one. Afterwards, the on duty staff should carefully fill in the equipment operation and handover records

Secondly, maintenance of petrochemical circular arc gear oil pumps. When equipment maintenance personnel carry out maintenance, the main basis for equipment maintenance is the actual operating time of the circular arc gear oil pump equipment. In general, after the operating time of small-scale pump equipment reaches 240 hours, a primary maintenance operation needs to be carried out. After the accumulated working time reaches 720 hours, a secondary maintenance operation needs to be started. After reaching 1000 hours, maintenance should begin. However, the large circular arc gear oil pump equipment is different from the small circular arc gear oil pump equipment, with a cumulative operating time of 1000 hours for primary maintenance, 3000 hours for secondary maintenance, and 10000 hours. When maintenance personnel carry out maintenance, they mainly include the following aspects

Firstly, technicians need to inspect the appearance of the equipment for any issues, including all exposed parts and the transmission structure of the equipment. Secondly, technicians need to check the condition of the transmission structure to determine if there is any looseness or corrosion in the structure. If there are loose positions, tools should be used for reinforcement. In addition, the wear of the bearing parts of the transmission structure should be checked. If the wear is too severe, components should be replaced in a timely manner. 3、 Technical personnel need to check the lubrication of the equipment, including various indicators of lubricating oil testing, status detection of oil filters, and other issues. After checking for accuracy, the oil level should be observed. If the oil level is insufficient, it should be replenished in a timely manner. If there are problems with the quality of lubricating oil, it should also be replaced and not used again to prevent leakage and blockage during subsequent operation. 4、 Technicians should carefully inspect the electrical system of the connected equipment. In order to maintain the cleanliness of the motor, they should frequently use cleaning tools to wipe the motor equipment. In addition, it is necessary to check the wiring ports between the motor and the cable for any poor contact. Afterwards, the insulation and grounding devices of the circuit should be inspected