News-Cangzhou Shiqi High Temperature Pump Industry Co., Ltd

Yima Furniture
contact
Contact us contact
Contact Form
  •  Can't see clearly? Click to replace
Home > News >
INFORMATION

Selection and configuration instructions for three screw insulation pump unit and precautions for use

※ It is strictly prohibited to use pipeline filters or Y-shaped filter devices. When configuring filters, the filtering area should be 20-30 times the cross-se...

2019-08-15

The Application of SN Series Three Screw Pump

In the hydraulic elevator industry, hydraulic transmission devices are used as hydraulic pumps, and in the chemical industry, they are used for conveying resins,...

2019-08-11

What are the advantages of ZW non clogging centrifugal pump?

The performance indicators of ZW non clogging centrifugal pump have reached the technical level of similar products. Due to the use of a special single channel i...

2019-08-07

Installation and start-up of BRY air-cooled high-temperature centrifugal pump

BRY air-cooled high-temperature centrifugal pump is made into various submerged lengths suitable for different working conditions based on the length of the cont...

2019-08-04

Explanation of maintenance points for KCB series stainless steel gear oil pump

After reassembly, a trial run should be carried out. Generally, it needs to be idle for 2 hours and the oil should be changed twice. During cleaning, there will ...

2019-08-01

Common faults and countermeasures of KCG high-temperature gear oil pump

Cause of malfunction:...

2019-07-29

What is a high-pressure slag oil pump (booster fuel pump)?

The high-pressure slag oil pump (booster fuel pump) is a new product of Shiqi's slag oil pump. ...

2019-07-25

Working principle analysis of CHL stainless steel multi-stage centrifugal pump

The main flow components of the CHL stainless steel multi-stage centrifugal pump include the suction chamber, impeller, and pressure water chamber. Used to trans...

2019-07-22

What are the characteristics of stainless steel rotor pumps?

Stainless steel rotor pump is one of the fluid equipment in the world. Its rotor is fully rubber coated, with strong damage resistance. The high-precision cleara...

2019-07-19

Regular maintenance of WCB portable gear pumps can effectively extend their lifespan

The WCB type gear oil pump belongs to a low pressure micro handheld energy-saving oil pump, suitable for selling unit oil drum shaft oil without power supply. Th...

2019-07-16

Analysis of Characteristics of Vehicle mounted Circular Arc Gear Pump

The vehicle mounted circular arc gear pump has good self suction performance, and no liquid needs to be filled before each pump operation. The lubrication of the...

2019-07-13

What are the common faults of the 2CY gear pump?

The 2CY gear pump is suitable for conveying various lubricating liquids, with a temperature not exceeding 70 ℃. If a high temperature of 200 ℃ is required, m...

2019-07-09

First Previous [19] [20] [21] [22] [23] 24 [25] [26] Next Last
 
Product search
One click dialing Send email